We are Manufacturing Battery Charger up to 150A The thyristor controlled rectifier is fully a solid state equipment for providing constant Voltage and Constant current for the battery charging process.

Voltage Ranges : 12V, 24V, 48V, 72V, 110V, 220V( options are float, boost, trickle) & (Auto , Manual)

Types:

  Float Cum Boost Charger

  Float Charger & Boost Charger

  Dual Float Cum Boost Charger

  Float Charger &Float Cum Boost Charger

Features:

  Automatic voltage regulation

  Smoothening filter circuit

  Short circuit and overload Protection

  Over voltage cut-off keep load and battery bank secure

  Automatic float/boost change over based on the current drawn by the battery

  Conventional Design and High quality standa

Features of Power Saver Panel

   Power saving is above 20% in lighting

  No load currents is very low below 1% of the rated output current

  On/off control can be achieved by time, dusk –dawn control, PLC& manual mode

  When used in manual mode all the control circuit is been bypassed directly, used in case of emergency

  Compact in size, box can be custom designed as per the requirement of the customer

  Programmable logic controller can be used for sequential, on/off for lights

  Easy to install with existing control unit and cabling

  Payback period is 8 to 12 months based on site conditions and usage

  Low maintenance, No moving parts, easy to service

  For the First time we are developed 5kVA to 200kVA 3ɸ Transformer Voltage Regulator (Voltage Stabilizer) for overcome and control these voltage fluctuation & can provide you with the desired constant output voltages

  Capacity – 5KVA to 200KVA

  It will boost 5% to 25% with reference to the input Voltage

Protections

   Under voltage

   Over Voltage

   Single Phase fail

   Phase Unbalanced

   Phase Sequence

   Over Load

   The Power Pack is used as a power source for VCB panel in substation where station battery supply is not available. Power pack gets charged from line connected PT. It can supply DC connected load for operation close/trip coils and other essential loads such as auxiliary supply to protection relay etc.

  I/P Voltage Ranges : 110VAC or 230VAC

  O/P Voltage Ranges : 12VDC /24VDC / 48VDC / 110VDC /220VDC

  Input Burden without Load: 10mA to 25mA

  Continuous Load : 90%

  Impulse load : 110%

  Battery : 7AH & 14AH 12/24V

  Protection : Over voltage & Short Circuit

  Indication : Charger ON ,Output ON, Battery Operation, Output over load, Battery low, Battery Reverse

Applications

  HT Panels for Auxiliary supply

  LT Panels